Easy RS232 or analog interfacing to most metabolic carts
Constant workload to 750 watts, peak to 1000 watts
The Corival pediatric is an RPM-independent ergometer. The control panel provides digital read-out of workload and pedal speed. The workload is continuously adjustable from 7 to 1000 Watts by simply turning a knob, and the load is independent of the pedaling speed in the 30-150 RPM operating range. The Corival operates silently, enhancing communication between operator and test person. Due to the platform and low center of gravity, the ergometer is extremely stable during operation. A retractable wheel enables you to easily move the ergometer to another location. The material chosen for the housing is impact resistant and is therefore suitable for use in exercise areas of physical therapy departments.
The Corival's unique "step-through" feature makes it easy for physically impaired patients to position themselves on the ergometer.
The Corival's workload is controlled electro-magnetically. This time-tested design simplifies the electronics and uses very few moving mechanical parts. Accuracy of workload and RPM is not influenced by mechanical drags or changing environmental conditions. As a result, reliability and accuracy of the Corival are unsurpassed. Also, its design permits rapid on-site servicing, should it ever be required.
- Dimensions : 94cm L x 65cm W x 93cm H
- Weight : 50kg
- Min leg length : 42 cm in lowest saddle position or
68 cm in highest saddle position
Min saddle height : 33 cm
Max saddle height : 62 cm
measured from top of the saddle to the middle of the crank axle
- Adjustable range saddle : 29 cm
- Power requirements : 115/230 VAC, 50/60 Hz, 130 VA
- Load range (continuously adjustable) : 7-1000 Watts
- Accuracy RPM : deviation < 2%
- Load : deviation < 3%
- Maximum Patient Weight: 95 kg
- Horizontal saddle adjustment not available on this model
External Control (Input / Output)
Both RS232 and analog interfaces are standard
Input: External load control
100 (W) = 1 (V) analog
Output: Load 100 (W) = 1 (V)
100 rpm = 1(V)
- Heart Rate Sensor with receiver, built into the ergometer,
read out of heart rate on Workload Programmer.
- Programmable Control Unit
This option enables you to programm up to 50 protocols. An additional display on the control unit is facing the doctor or operator.
You can interface on the PC in your chosen protocol. For example, moving backwards or forwards to the previous or next step or going to recovery in the protocol. During the test the protocol will be shown on the PC. It's also possible to register the heartrate.
Blood Pressure Module
An ECG triggered blood pressure module with DKA (Dimensional K-sound Analysis). Requires the optional heart rate module or an externally supplied ECG pulse (TTL pulse). Comes with cuff and double-sided microphone.
The 0-watt Option
Permits starting the ergometer without load (0 watt) at a rpm of 60. The number of revolutions is increased from 0 to 60 by means of a motor drive. With this option there is no energy loss due to the start-up phase (to 60 rpm).
TurboFit Exercise Manager Software
Optional Windows-based software provides PC-control and creates custom workouts and graphs and records watts, heart rate and many other variables.
Click here for
TurboFit Exercise Manager
(Programmable Control Unit not required for TurboFit)
Last Updated: 23 Feb 2017