Gas Analyzer , CO2 Precision - Gold Edition (#17515)
Gas Analyzer , CO2 Precision - Gold Edition (#17515) - Image 2

Gas Analyzer , CO2 Precision – Gold Edition (#17515)

$5,595.00

CO2 Precision Gas Analyzer – Gold Edition (#17515)

*A precision infrared Carbon dioxide gas analyzer with end-tidal option included.

  • A precision, low-cost infrared Carbon dioxide gas analyzer with end-tidal option included
  • Built-in gas pump to draw gas through the analyzer.
  • Precision analyzer has a range from 0 to 10%
  • May be adjusted to 0 to 15% CO2 on request
  • CO2 concentration displayed on a digital meter
  • Corresponding analog voltages are available on rear panel BNC connectors
SKU: 17515 Category:

Description

CO2 Precision Gas Analyzer – Gold Edition (#17515)

*A precision infrared Carbon dioxide gas analyzer with end-tidal option included.

This precision analyzer has a range from 0 to 10%. It is typically used to determine the CO2 concentration in respired gases or gas mixtures from collection bags, or other sources. May be adjusted to 0 to 15% on request.

The instantaneous CO2 concentration or the highest value during a breathing cycle (EtCO2) is displayed on a digital meter and corresponding analog voltages are available on rear panel BNC connectors.

A gas pump is built in to draw the gas through the analyzer.

A flow meter indicates the gas sample flow. Gas flow is internally adjustable. Adjustment may affect response time. A gas return port may be installed on requst at no charge.

*Precision gas mixtures are available for calibrating the analyzer.

Specifications

Range: 0 to 10% CO2
Signal Output: 0 – 5 Volt = 0 to 10% CO2 (0 to 10V on request, no charge)
Sensitivity: +/- 0.01% CO2
Resolution: 0.01%
Accuracy (of reading): Input Range Tolerance (torr)(torr)

0 – 19.9 +/- 1

20 – 39.9 +/- 1.5

40 – 59.9 +/- 2.0

60 – 76 +/- 2.5
Noise: 0.5% of reading typical.
Drift (zero): Less than 1.5 torr in 1 hour (At constant temperature)Less than 3.75 torr in 24 hours
Flow Rate (Nominal): 250 ml/minute, internally adjustable
Response Time: Measured between 10% – 90% of full scale = 120 ms typical
Interference: H2O 100% RH @ 37 degree C, 0.5 torr CO2 equivalent max.
Power: 110/220 VAC, 50/60 Hz
Warm-up: 15 minutes
Size: 5-3/4″ (146mm) Height x 8-5/8″ (229mm)Width x 15″ (380mm) Depth
Gas Sample Inlet: Rear Panel (Front panel on request)
Drying Column: Nafion semi-permeable membrane brings sampled gas to ambient humidity. No chemical dryer required.

*No. 21515 CO2 Absorber Column, approx 1/2 pound, to remove ambient CO2 from air for true zero calibration.1 year warranty, details in FAQ

Related products