Gas Analyzer, O2 Precision - Fast Response (#17625)
Gas Analyzer, O2 Precision - Fast Response (#17625) - Image 2

Gas Analyzer, O2 Precision – Fast Response (#17625)

$3,395.00

O2 Precision Gas Analyzer – Fast Response

This precision analyzer has a range from 0 to 100%, other ranges are available on request. It is typically used to determine the O2 concentration in respired gases or gas mixtures from collection bags, or other sources.

  • A precision low-cost oxygen analyzer complete with sample pump.
  • Easily replaceable O2 sensor is guaranteed for 2 years
  • Oxygen concentration shows on digital display
  • 1 year warranty
SKU: 17625 Category:

Description

O2 Precision Gas Analyzer – Fast Response

Low-cost, fast response oxygen analyzer

This precision analyzer has a range from 0 to 100%, other ranges are available on request. It is typically used to determine the O2 concentration in respired gases or gas mixtures from collection bags, or other sources.

The oxygen concentration is displayed on a digital meter and a corresponding analog voltage is available on a rear panel BNC connector.A gas pump is built in to draw the gas through the analyzer. Gas flow is internally adjustable. Adjustment may affect response time. We can install a gas return port on request. Precision gas mixtures are available for calibrating the analyzer.

O2 sensor lasts about 2 years, easily replaced by user.

Photo also shows companionCO2 analyzer.Specifications (subject to change without notice)

Not intended for clinical use, for teaching or laboratory use only

Type: Cold, Dry Fuel Cell
Estimated Life: Approximatly 24 months (High O2 concentration reduces life)
Range: 0 – 100% O2
Repeatability: 0.2% O2
Resolution: 0.1% O2
Zero Drift 0.3% O2/week (at constant temperature)
Output: 0 – 5 Volt = 0 to 100% O2
Meter Display: 4-1/2 digit LED  (0.00 to 100.00)
Flow Rate (Nominal): 400 ml/minute
Response Time: Approx. 150 milli-seconds
Operating Temperature Range: 10o to 40oC
External Power Supply 100 – 250 VAC, 50/60 Hz (Included), 0.5 Amp at 115VAC
Warm-up: 30 minutes to 0.1% O2
Size: 2.75″ (70 mm) Height x 6.3″ (155 mm) Width x 10″ (255 mm) Depth
Drying Column: Nafion semi-permeable membrane brings sampled gas to ambient humidity.

No chemical dryer required.
Gas Sample Inlet: Front Panel

 

*End-tidal O2 option available in model 17518-C only. 1 year warranty details in FAQ

Related products